How to add the Expansion Board to a WatchMon4 - VIDEO

Here is an instructional VIDEO showing all the process step-by-step

Here are the parts you will be required to perform for this upgrade:

Expansion Board

26pin ribbon cable

3D printed protective cover for WatchMon4

din-rail PCB holder

 

You will be required to remove the 3D printed protective cover from your WatchMon4 

Here is a photo of the WatchMon4 with the Expansion Board after the upgrade (please watch the step-by-step VIDEO for instructions)

 

Reference  

Watchmon4 hardware guide and pin assignment

_______________________

Watchmon4 - Product page 

Back to FAQ main page