News — Watchmon Toolkit Updates

WatchMon toolkit (Release 1.0.27 - firmware 1.39)

Watchmon Toolkit Updates

Download setup at WatchMonToolkitInstaller_1.0.27.msi    New Features Nil   Enhancements Enable WatchMon version 1.02 hardware   Fixes Nil   Reference Next release (software 1.0.28 - firmware 1.40) Previous release (software 1.0.26 - firmware 1.38) How to install the WatchMon Toolkit software How to upgrade the Watchmon firmware

Read more →


WatchMon toolkit (Release 1.0.26 - firmware 1.38)

Watchmon Toolkit Updates

Download setup at WatchMonToolkitInstaller_1.0.26.msi  New Features Hardware Cell Group setup revisited to streamline configuration and suppress less common parameters Dialogue to handle Device Sync and monitor outcome and recommend action if required Dialogue to handle Network Tester and monitor outcome and recommend action if required Cell Monitor poller to select less common modes Detect if the CMU device sync task is required Auto Level Bypass extra functionality mode to enable auto leveling of the cell voltage to the same value even when below target bypass voltage   Enhancements Extra status icon for extra bypass re-balancing activity, CMU device resync required Snapshot report on adhoc events to include setup...

Read more →


WatchMon toolkit (Release 1.0.25 - firmware 1.37)

Watchmon Toolkit Updates

WatchMon toolkit (Release 1.0.25 - firmware 1.37)

  • Wizard setup to default configuration 
  • Extra bypass modes for middle SoC%.
  • Voice Player - talking bms stats.
  • Snapshot report scheduling logging
  • Eltek 2000HE/48 charger connectivity

Read more →


WatchMon toolkit (Release 1.0.25 - firmware 1.37) beta

Watchmon Toolkit Updates

Download setup at WatchMonToolkitInstaller_1.0.25.msi    New Features Nil   Enhancements Nil   Fixes Setup Wizard follows same convention of Save / Default buttons and register recent event timestamp Hardware CellGroup setup enable configuration to be received via wifi Session History allow direct reference access via GO  Lifetime history reset to  Bypass tester to handle longer cell series network and report overall stats Shunt setup - idle charge / discharge thresholds can be saved   Reference Previous release (software 1.0.24 - firmware 1.36) How to install the WatchMon Toolkit software How to upgrade the Watchmon firmware

Read more →


WatchMon toolkit (Release 1.0.24 - firmware 1.36)

Watchmon Toolkit Updates

WatchMon toolkit (Release 1.0.24 - firmware 1.36)

Download setup at WatchMonToolkitInstaller_1.0.24.msi    New Features Wizard setup to auto populate all screens with hardware/control defaults settings  Cellmon bypass extra adjustment modes for low volt cutout, footer status icon when re-balancing. New method to check when cells are the same voltage for extended periods (1 min) and not require a shunt. Record recent time stamp events. Voice Player - configurable telemetry oral speaker for key stats with alternative voices, rate and volume settings, handy when not able to look at the display whilst testing.   Enhancements Snapshot report now includes extra scheduling options (4hr, 1hr, 15min, 5min), additional fields, also warns...

Read more →