Watchmon Toolkit Updates

WatchMon toolkit (Release 1.0.26 - firmware 1.38)

Download setup at WatchMonToolkitInstaller_1.0.26.msi 

New Features

  • Hardware Cell Group setup revisited to streamline configuration and suppress less common parameters
    • Dialogue to handle Device Sync and monitor outcome and recommend action if required
    • Dialogue to handle Network Tester and monitor outcome and recommend action if required
    • Cell Monitor poller to select less common modes
    • Detect if the CMU device sync task is required
  • Auto Level Bypass extra functionality mode to enable auto leveling of the cell voltage to the same value even when below target bypass voltage



  • Extra status icon for extra bypass re-balancing activity, CMU device resync required
  • Snapshot report on adhoc events to include setup configuration
  • Hardware expansion setup revisited to enable new feature options for 7 input and 10 output functions
  • Highlight fault labels for hardware setup related to system, cellgroup and shunt 
  • Integration setup include canbus address for
    • Base Addr = bms range base / remote and group
    • Remote Addr = remote charger/inverter range (prior default)
    • Group Addr = group range (master/slave CMU exchange interfacing)



  • Cell info caching watchdog from fix reset interval to adjusted interval based on system size
  • CellMon device sync function enhancements to handle long chain networks
  • Bypass tester to handle long chain networks
  • Shunt nominal capacity increased to 3500Ah
  • When saving setup ensure that floating points parameters are verified correctly
  • Setup Wizard can 
    • handle the no shunt scenario
    • revised defaults for relevant scenarios
    • allow technician authorisation pincode if required



Next release (software 1.0.27 - firmware 1.39)

Previous release (software 1.0.25 - firmware 1.37)

How to install the WatchMon Toolkit software

How to upgrade the Watchmon firmware

Reading next

Beginners installation guide of BMS by DIY Tech & Repairs
196 cell monitors via WatchMon supervisor

Contact Us

Do you have any question?